OEM Car Care Auto Brake System Cleaning Aerosol Spray Brake and Parts Cleaner
|Car Cleaning Spray Brake Clutch Cleaner
|500ML or customized
|Disc & Drum Brakes, ABS Brakes, Clutches, CV Joints, Wheel Bearings, Non Electrical Tools, Greasy & Oily Surfaces.
YULCHEMI BRAKE & CLUTCH CLAENER is a residue-free, fast-drying, heavy-duty formula that removes brake fluid, grease, oil, operating erosion and other contaminants from brake parts, pads, discs, linings, drums, cylinders and springs. This product is safe for all painted and rubber surfaces.
1. Super brake system cleaner can quickly remove oil, dust and dirt from the brake disc or other brake parts.
2. The formula has no chloride or aromatic, dries fast and leaves no residue.
3. It helps eliminate disc squeal and chatter
4. Enable the brake system to maintain excellent braking performance.
5. Suitable for cleaning the dirt of other metal parts.
1. Remove the wheel and make sure the brake disc has cooled. (use advice: use 1 can on 4 wheels.)
2. Be fully uniform before use, and place the oil collecting tray below the part to be cleaned
3. Spray this product 15cm away from dirt and dust.
4. If there is serious oil pollution, please spray it repeatedly and wipe it with a cloth or brush.
5. After cleaning, wipe off the liquid residue with a cloth, and then blow dry with a high-pressure air machine, and re-assemble it after it is completely dried. Do each of the 4 wheels once.
6. When the drying is not complete, the braking performance will decline temporarily, so the braking force should be tested after drying. You can only drive on the road after you confirm it is correct.
HangZhou Yuchuanxing New Material Technology Co., Ltd., 1 of the subsidiaries of Yuchuan Group, is a professional enterprise specialized in researching, developing and manufacturing car care products, spray paints, tyre emergency repair products, household and consumer items, grease & lubricants, adhesives & sealants, etc. With strong R&D team, we can provide our clients with both OEM & ODM services. With quality products, professional service, reasonable price and fast delivery, we keenly hope to establish mutual benefit business relationships with our clients.
1. OEM & ODM available.
2. Different formula, fragrance or designs according to client’s requirement.
3. Customs clearance and shipping arrangement for export.
4. Manufacture, fill, pack and QA checkout on finished products.
5. Design and submission of samples for the products and/or packing material.
6. Offer different formula, fragrance or design as per customer’s requirement.
Product Development & Test
Q1. Are you manufacturer?
A: Yes, we are a professional manufacturer of aerosol products, especially in car care products, spray paints, household care products, industrial products, etc.
Q2. What is your terms of payment?
A: Could be discussed.
Regularly, 30% deposit and 70% balance before shipment.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can provide 2-3 samples for free. But as this is aerosol products with pressurized gas, it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels. And the freight cost need to be prepaid by customers.
|Dewaxing Car Cleaning Chemical
|500 – 1000ml
|Car Cleaning Chemical PH:
|Strong Abluent for Engine Type:
|Glass Abluent Type:
|Yulchemi or Customized
Symptoms of a Broken CV Joint
Whether you have an old or new car, a CV joint is an essential part of the car’s axle. When it breaks, it is important to know the symptoms of a broken CV joint and how to repair it.
Repairing a damaged or torn CV boot
Whether you have a car, truck, SUV or any other type of vehicle, you should regularly check out your CV boot. The CV boot is the first line of defense against dirt and water from entering the axle. If your CV boot is torn, it will allow dirt, water and other debris to get into the joint, causing it to wear out faster. A torn CV boot also allows grease to escape, which can cause damage to the joint.
If you think you might have a torn CV boot, make sure to have it inspected. This should be done at least once a year, although more often if you have an SUV or a vehicle with a lot of mileage. If you notice a torn CV boot or any other type of damage, you should get it fixed right away. It can be expensive to replace an axle, but replacing a boot is much less expensive.
A CV joint is a coupling device that connects the rear wheel of your vehicle to the front wheel. It transfers the torque generated by the engine to the wheels. If it is not lubricated properly, it can wear out and cause expensive repairs. Having the CV boot checked regularly can keep your axle in good working condition and prevent it from wearing out.
You should be able to tell if you have a CV joint that is leaking by the sound it makes when you turn the wheel. The sound will vary with speed, and will be noticeable only at certain speeds. In general, you will hear a rattling sound. You can also get a click or pop from the axle when you turn it. If there is no visible tear, then the axle is fine and will pass inspection.
If you have to replace your CV boot, make sure you do it correctly. To remove the old boot, you should use channel locks or a razor blade to cut it off. You can then use a screwdriver to remove the metal bands. If you want to save time, you can use a cleaning solution to remove dirt and debris from the old boot.
In addition to replacing the boot, you should also check the CV joint for signs of wear. It is important to check the joint for signs of wear because it can cause a rattling noise. The noise can travel to other parts of the chassis and under the vehicle. Also, you may experience strange noises or strange vibrations from the joint, which can make driving difficult or unsafe. If you suspect that your joint is worn out, you should take your vehicle for a drive to see if you can detect any signs of wear.
If you have an older vehicle or one that has been infrequently serviced, you should replace your CV boot at least once a year. It is not hard to do.
Symptoms of a bad CV joint
Symptoms of a bad CV joint aren’t always obvious. The symptoms of a bad CV joint can be hard to spot, and can even be dangerous if they go unnoticed. However, if you know what to look for, you can catch a problem early and save yourself money and trouble. There are many things you can do to find out if your CV joint is faulty, and these include listening for the right sound and performing a visual inspection.
One of the most common symptoms of a bad CV joint is a clicking noise when you turn. The sound is most often heard during sharp turns at low speeds, but it can also be noticed during acceleration or deceleration.
If you hear a clicking noise while you are turning, it’s a good sign that your CV joint isn’t working as well as it should be. This is because a bad CV joint can cause excessive vibrations, which can affect your steering and transmission. Using a jack to lift your vehicle up can also help you determine whether or not your CV joint is faulty.
Another common symptom of a bad CV joint is a loss of alignment. This can be especially dangerous if you are driving on an uneven surface. It can cause your front tires to point in different directions. In addition to the loss of alignment, a bad CV joint can also cause your wheels to bounce around. If you aren’t able to detect a problem quickly, it can lead to a serious accident.
Another symptom of a bad CV joint is the rumbling noise that your wheels make as you change gears. This is especially dangerous when you are driving at speeds of 15 to 25 MPH, as it’s very likely that the joints aren’t properly greased. You should also check to see if your transmission fluid level is low, which can lead to overheating and shifting problems.
The cv joint can also cause a clunking sound when you shift into reverse. This can indicate a faulty inner or outer CV joint, or it can be a sign of a faulty transaxle. If you hear a clunking sound when you’re shifting into reverse, it’s best to have a mechanic inspect it as soon as possible. If you aren’t sure whether or not your cv joint is faulty, or if you don’t know how to repair it, there are many guides to help you. You can also check the area surrounding your CV joint boot for tears or splits.
Other common symptoms of a bad CV joint include a grinding or shuddering sound that occurs when turning, as well as excessive vibrations that can be heard when the car isn’t moving. These noises can be caused by a leak in the transmission fluid, a clogged filter, or a broken shaft seal.
Symptoms of a failed inner CV joint
Symptoms of a failed inner CV joint include clicking noises when turning. These noises may indicate a problem with the CV joint itself or a damaged or worn joint boot. They may also indicate problems with the transmission. When the boot is worn, the CV joint boots may leak grease. This can cause stains to appear around the rim of the wheel. When the boot is damaged, the grease may leak into the wheel well. These leaks can lead to damage to the steering and suspension components.
Another common symptom of a failed inner CV joint is a clunking noise when accelerating or decelerating. This noise is caused by the failure of the joint, which allows for dirt and grease to enter the joint. The noise becomes louder as the acceleration and deceleration speeds increase. The joint must be repaired immediately to avoid damage to the vehicle.
If a clunking sound is heard, the first thing to do is to check the CV joint boot. It should be tightened to the proper torque to prevent damage to the joint. The boot should also be inspected for leaks. If the boot is torn, it may have to be replaced. If there are no leaks, the joint may be in good condition.
If the boot is torn or cracked, it may leak grease inside the wheel well. If the grease leaks, it can be a sign of damage to the joint itself or to the steering and suspension components. Depending on the damage, the repair may involve replacing the entire joint assembly.
If the CV joint fails, the axle will not be able to balance the body of the vehicle. This can cause the vehicle to bounce on flat paved roads. The car may also vibrate and become hard to control. If this happens, you should contact a mechanic to inspect the CV joint.
If you notice a clunking sound or any other symptom of a failed inner CV joint, you should take your vehicle to a mechanic. A mechanic may have a service manual that can be used to diagnose and repair failed CV joints. They will also advise you on the proper procedure for replacing a joint. If the joint has already failed, it can be replaced with a joint banding tool.
Other symptoms of a failed inner CV joint include side-to-side shaking while accelerating. This can occur in any type of vehicle. The clunking sound can also occur when the driver is driving in a circle. A clunking noise is also heard during sharp turns at lower speeds.
If the joint is failing, it may be possible to identify the problem by shifting gears into reverse. This can be done with the brake on. If the transmission fluid is leaking from the CV axle, the shifter will move in reverse instead of forward.
editor by CX 2023-11-23