OE NO.: 8D0498099C
Model: PASSAT (3B2), Golfing IV (1J1)
Year: 1996-2, 3 0571 018, 175821, QJB833
Warranty: 2 Many years
Auto Product: For VOLKSWAGEN PASSAT
Dimensions: 30X59.5X38
Type: Outer C.V. Joint
surface area hardness: HRC58-sixty two
warmth remedy depth: .8-1.2mm
precision of set up: ≤0.03mm
certification: ISO9001/TS16949
warehouse administration: 1st in 1st out
Interior Enamel, wheel aspect: 30
Fitting Situation: Front Axle
Outer gearing wheel facet: 38
Packaging Particulars: plastic bag/box/carton/pallet or according to your need
Port: HangZhou/ZheJiang /and many others.
Product Specifics OUTER CV JOINT 30X59.5X38 FOR VOLKSWAGEN PASSAT B5 OEM: 8D0498099C
| Kind | Outer CV Joint | Content | 55# ,20CR ,GCR15 |
| Shade | As Regular | OE Number | 8D0498099C |
| Auto Make | For VOLKSWAGEN PASSAT | Certification | ISO9001/TS16949 |
| Fitting Placement | Front Axle | Warranty | two several years |
| Sort | More than 1500 items | MOQ | 200 Parts |
| Packing | Neutral packing | Port | HangZhou/ZheJiang /and many others. |
CV Joint Description Common CV Joint IssuesFor easy operating, a CV joint utilizes a particular lubricant that is packed in and then sealed by plastic or rubber boot secured with a pair of clamps. As long as that boot is undamaged, the CV joint ought to last a lengthy time with no routine maintenance.It is a lot more most likely that your auto will rust by way of just before the CV joint goes. However, a ruined or cracked protective boot opens up a whole entire world of discomfort as lubricant spills out and h2o infiltrates the joint.
This leads to the CV joint to corrode and fail. Outer boots seem to be the far more vulnerable kinds, most likely since they need to stand up to a lot more movement than do the inner boots.A effectively trained and qualified technician will inspect your CV boots for tears, cracks and other injury each time you deliver your vehicle in for scheduled care.
Other Items Abdominal muscles Speed Sensor
Abdominal muscles Ring
CV Boot and Clamps
Wheel hub and Bearing kits
Tripod Joint
Bolts and Nuts
Our Firm Hohan Auto Components Co., Ltd. is a professional auto areas and equipment maker, provider and exporter. CZPT aims to supply CZPT clients with a extensive selection of ideal top quality merchandise with most aggressive costs. In buy to obtain this aim, CZPT has recognized strict good quality manage, inspection, Manufacturing facility low cost value SCR6310 large load rolled ball screw greatest management and excellent provide method.To make certain the quality of our items, all our factories make automobile areas strictly to IS9001/TS16949 high quality certification.
VR Map 25711112nbzcjx2/index.htmlThis is our company’s VR map, even if you are at house, you can go to our business. Packing & Delivery Our most specialist packaging Transportation of massive trucks to the seaport And global transportation cooperation Our Provider 1. OEM Manufacturing welcome: Item, Package… 2. Sample get 3. We will reply you for your inquiry in 24 several hours.4. soon after sending, we will observe the items for you once every single 2 times, till you get the products. When you got the merchandise, examination them, and give me a opinions.If you have any queries about the issue, speak to with us, we will offer the remedy way for you.
FAQ Q1. What is your phrases of packing?A: Usually, we pack our items in neutral white packing containers and brown cartons. If you have lawfully registered patent, we can pack the items in your branded bins following obtaining your authorization letters. Q2. What is your terms of payment?A: T/T thirty% as deposit, and 70% before delivery. We’ll present you the photographs of the products and offers just before you spend the equilibrium. Q3. What is your phrases of supply?A: EXW, FOB, CFR, CIF, DDU. This fall. How about your delivery time?A: Normally, it will just take thirty to 60 days right after obtaining your advance payment. The particular delivery time is dependent on the things and the quantity of your get. Q5. Can you produce in accordance to the samples?A: Indeed, we can produce by your samples or complex drawings. We can construct the molds and fixtures. Q6. What is your sample coverage?A: We can source the sample if we have completely ready elements in inventory, but the consumers have to shell out the sample cost and the courier expense.Q7. Do you test all your merchandise prior to delivery? A: Sure, we have one hundred% test prior to shipping and delivery Q8: How do you make our organization extended-phrase and excellent romantic relationship?A:1. We hold great high quality and competitive price tag to ensure our clients gain 2. We respect every buyer as our pal and we sincerely do company and make buddies with them, Anti-corrosion higher velocity ceramic magnetic bearing turbo 6005 total ceramic bearing for bikes no matter exactly where they arrive from.
How to Properly Lubricate a CV Joint
Having a CV joint in your vehicle is essential if you are looking to maximize the power output of your front or rear axle. A CV joint is a type of constant-velocity joint that transmits power through a variable angle. It is used in front-wheel drive vehicles. Unlike a constant-ratio joint, a CV joint does not increase friction.
Lack of lubrication
Using CV joint without proper lubrication can cause damage to the joint and may result in your car being unsafe to drive. If your car’s CV joint has been damaged, you can have it repaired at a local mechanic.
A CV joint is an important component of your car’s suspension system. It is designed to transfer motion from the transmission to the wheels. It is made up of two joints: an outer joint and an inner joint. The outer joint connects the driveshaft to the wheel, while the inner joint connects the driveshaft to the transmission.
The joint’s grease can leak out, and this can cause excessive friction. This may result in noise from the CV joint when you start your engine or when you turn a sharp turn. You may also notice a clicking noise. You should also check for signs of corrosion in the joint.
A CV joint may also fail because of wear and tear. It is a durable component, but it will not last forever. It is important to inspect it regularly to avoid causing more damage.
If you notice a lot of noise from the CV joint, you may want to have it repaired. This can be caused by a worn joint or a faulty CV boot. It is best to have it repaired before the lubrication becomes too thin and is no longer effective.
Torn or damaged CV boot
Getting your hands on a torn or damaged CV boot can be a real pain. However, there are some tricks of the trade you can try out before calling it quits. One of the easiest ways to do it is with a small screwdriver and a few minutes of your time. If you’re lucky, you might even end up with a new set of wheels!
The first step is to find out what you need to replace. This can be done by removing the front and rear hubs, aka the CV axles. Once you’ve got them out of the way, you can start to replace the bearings. The process should take no more than an hour per side, depending on your car’s particulars. You can even take a break and have a beer on the house while your work is done. After all, you’ve just had a major automotive repair done.
The biggest problem is finding the right tools to do it. You’ll also want to look around for a competent mechanic, and a spare set of eyes to watch over your shoulder. Depending on your car’s particulars, you may also want to check out a CV boot repair kit. You’ll also want to be on the lookout for any leaking fluids from the front differential. The most common culprits are brake fluid and power steering fluid, but there are many more to choose from.
Larger tyres
Changing your tyres is one of the better ways to improve your ride. For one, you will not have to worry about a plethora of road debris, i.e., rocks, grit and grime. The result is a much more pleasant ride and a better environment for your passengers to enjoy. Moreover, you’ll save yourself some cash in the long run. This is because a properly maintained set of tires will last much longer than their cheap counterparts. A side-by-side comparison of similar tires will give you an idea of just how much money you can save. This is not to mention the added bonus of improved braking performance.
While you’re at it, swap out the cheap ol’ tyres for some high performance rubber and you’ll enjoy a much improved ride for years to come. Not only that, but you’ll also reap the rewards of better gas mileage. The best part is, you’ll be rewarded with a better looking car as well. After all, who wants to spend time in the shop repairing something that is not actually improving the driving experience?
A good time to check out your local tire shop for a snazzy new set of tires is a nice rainy day.
Lifting your 4X4
Using a CV joint to lift your 4X4 can be a good idea if you’re looking to increase ground clearance or add traction. Unfortunately, this can cause premature wear to the CV joint. To avoid this, you should take steps to protect the CV joint as much as possible.
If you’re considering using a CV joint to lift your 4X4, there are several things you need to know. CV joints are part of your suspension system, and they connect your engine to the wheels. There are many different types, and they each have different working limits. You should also take into account the materials used, as well as the range of lift.
CV joints are often used on IFS 4x4s, but they’re not the only option. Other options include leaf springs and coil springs. You can also use a suspension lift kit. This will allow you to increase the height of your vehicle and fit bigger tyres. These can increase your ground clearance, traction and visibility. However, they can also be expensive and require significant modifications to the suspension.
The largest benefit to using a CV joint to lift your 4X4 is the increased driveline strength. However, it can also cause your CV joints to fail prematurely. The joints need to work at a larger angle than usual to accommodate the added weight. A lift under two inches will usually be within the original tolerances of the 4×4.
If you want to lift your 4X4 with a CV joint, you should first determine the type of CV joint you need. There are many aftermarket companies that offer competition-spec chromoly CV joints, but only a few in Australia.
Blown CV Axle
Having a bad CV Axle can cause a car to run poorly, which can also lead to serious personal injury. The best way to diagnose whether your vehicle is suffering from a bad axle is to have it inspected by a professional.
The CV axle is a direct link between the wheels and the transmission, and as such is subject to heavy stress. It can wear out quickly, causing the car to make loud noises and be difficult to control.
If your CV axle is making noises when turning, it may be suffering from a damaged joint. If the joint is damaged, the shaft could break away from the wheel, causing serious damage. This can be dangerous if you are driving at speed and need to avoid hitting something.
When your CV axle is damaged, it can also cause you to pull to one side, which may indicate that it is out of alignment. The axle is also susceptible to damage from water. This can cause corrosion and rapid wear.
A worn CV joint can also cause excessive vibrations while accelerating. This can intensify as you accelerate, making it difficult to control the car.
In addition, a bad CV axle can make a loud, scoring sound when it runs. It is best to have it checked by a mechanic.
You may also hear a clicking noise when turning. This is most often heard during sharp turns at low speeds. If your CV axle makes a clicking noise when turning, it is likely that the joint is damaged.
In addition to clicking noises, a bad CV Axle can cause your car to make knocking or knocking noises. This may sound like a normal knocking noise, but it is a sign that the axle is wearing out.
editor by czh 2023-07-03