China supplier CZPT OEM 6001548660 6001548658 6001548103 Auto Parts CV Joint Drive Shaft Producer for Renault Lada Vesta 2180 Dacia Logan Sandero Stepway Volkswagen Passat driving with bad cv joint 4×4

Product Description

Common faults of the automobile CV JOINTS:
1. Abnormal noise
When turning left and right, there is a “click” sound of metal knocking on 1 side of the wheel. The noise disappears when driving in a straight line. This is a typical failure phenomenon of the CV JOINT.
2. Stuck
When the vehicle is running at high speed, the wheels resonate. It belongs to the lack of lubrication inside the CV JOINT, and the vibration caused by wear and tear during operation.
3. Fracture
After the CV JOINT is worn to a certain extent, the internal bracket is broken, and the transmission function will be lost, so that the vehicle cannot move after the gear is loose and the clutch is released.

The composition of the CV JOINT universal joint:
The composition of the CV JOINT universal joint: 1. Star sleeve (inner raceway); 2. Spherical shell (outer raceway); 3. Steel ball; 4. Clamp; 5.rubber Boot; 6. bracket. CV JOINT constant velocity universal joints can be divided into axially non-telescopic (fixed) CV JOINT universal joints and telescopic CV JOINTS universal joints according to whether the axial direction of the CV JOINT universal joint can move.
Structurally, the internal splines on the inner surface of the star sleeve of the CV JOINT universal joint are connected with the transmission shaft. Its outer surface has 6 arc grooves as the inner raceway of the steel ball, and the outer raceway as the inner surface of the spherical shell. Each of the 6 raceways assembled by the star sleeve and the spherical shell is equipped with a steel ball, and the 6 steel balls are kept on the same level by the cage (CV JOINT). The power is transmitted from the transmission shaft through the steel ball and the spherical shell.
The structural feature of the telescopic CV JOINT universal joint is that the inner wall of the cylindrical shell and the outer surface of the star sleeve adopt cylindrical straight grooves, and the raceway produced by the combination of the 2 adopts steel balls. At the same time, steel balls are also installed in the holes of the CV JOINT. The inner hole of the star sleeve is connected with the input shaft by a spline. This configuration allows movement of the star sleeve in an axial direction corresponding to that of a simple housing.

Materials and technical requirements for main components of HDAG CV JOINTS universal joints:
1. Bell shell/cylindrical shell: 55#, CF53
1) High-frequency quenching of spline parts to HRC52-58
2) Intermediate frequency quenching of ball hole and ball raceway to HRC58-62
3) Dimensional accuracy and shape tolerance should meet the drawing requirements
4) There should be no cracks in the flaw detection
2. Star sleeve/cage/triple pin: 20CrMnTi
1) Carburizing and quenching – carburizing layer depth 0.7-1.2mm, quenching hardness HRC58-62
2) Dimensional accuracy and shape tolerance should meet the drawing requirements
3) There should be no cracks in the flaw detection
3. Half shaft: 40Cr
1) Carburizing and quenching – carburizing layer depth 0.7-1.2mm, quenching hardness HRC52-58
2) Dimensional accuracy and shape error meet the drawing requirements
3) There should be no cracks in the flaw detection
4. Dust cover: Neoprene CR, thermoplastic polyester elastomer TPEE
5. Clamp: stainless steel 1Cr18Ni9Ti or galvanized steel

Product description
HDAG oem 6 96160589 96243575 845571058                  391016613R 49507-38F 11186~/1 845571057                    391 49505-3KA10 845571013 845571014 845571057
GO843 Tavria 1102                    ZAZ Tavrija 1.1/1.3 LADA XRAY (16-) 1.6i, 1.8i.
RENAULT Sandero stepway (14-) Lada Largus (12-) 1.6i 16V MT 82 11186~/1 845571014 CO 438 OK2N122610
OK202-25-4 845571013 OK30A22510
OK30A22610 Moskwitz 2141 VAZ 2123 Lada Vesta (15-) (КПП Renault JH3) UAZ 3741 UAZ 3741 845 KK38822610 -10 Daewoo /Chevrolet  Lanos 97-                             Nexia 95-                             Esoero 93-    Hyundai Accent 94-  Lantra 90-                               Pony 85- Mazda Kia 323 98-
Sephia II 98- 1.5/1.6 ZA1102OT VAZ  2123  Lada X-Ray (15-) (КПП Renault JR5): 845571057 845 2- Daewoo /Chevrolet  Lanos 97-       Nexia 95-    Esoero 95-      Nubira 97-Leganza 97-   Hyundai Accent 94-  Lantra 90-                               Pony 85- Kia Rio 82 3653
GO425 49591-5710
49501-5711
495 Daewoo /Chevrolet      Nexia 95-                            Esoero 95-       Hyundai Getz 02-1.3/1.4/1.6    Kia Rio 845 Daewoo /Chevrolet      Matiz 98-                            Matiz 05-       Hyundai Elantra 00   Lantra 90- 1.5/1.6 Kia Spectra 00-1.6 Daewoo /Chevrolet  Lanos 97-       Lacetti 04-    Nubira 02-     Aveo  03-                         Moskwitz 2141 Moskwitz 2141 UAZ 3160 Ford Focus I-II 04-
C-MAX 03-  1.4/1.6/2.0 Toyota Camry 01-
Rav 00- 00- 2.0/2.4 Volkswagen Passat 98/A4 95-/A6 98/Superb 02- 1.6/1.8/1.9D/2.0/2.3 ABS+ Volkswagen Audi Skoda Passat 98 
A4 95-  
A6 98-
Skoda Superb 02-1.6/1.8/1.9D/2.0/2.3 Chevrolet      Aveo 04-Kalos 05-       Hyundai Sonata 98-Santafe 01 –
Trajet 00-
Kia Magentis00- Kia Picanto 07- 1.0/1.1 Daewoo /Chevrolet      Matiz 98-                            Matiz 05-       VAZ  2108-21099 Niva shaft joint UAZ 3160 UAZ 31519 Hunter UAZ 31519 Hunter UAZ 3163 Patriot Toyota Corolla 01-
Avensis 00- 1.4/1.6/1.8 DACIA LOGAN 1.4,1.6 DCI
DACIA LOGAN MCV 1.4,1.6DCI LADA Kalina 1117
LADA Kalina 1118
LADA Kalina 1119
LADA PRIORA 2170
LADA PRIORA 2172 Volkswagen Audi Skoda Passat 98 
A4 95-  
A6 98-
Skoda Superb 02-1.6/1.8/1.9D/2.0/2.3 Chevrolet      Lacetti 05-Nubira 05/04-       Hyundai Sonata 98- Kia Ceed 06- 1.4/1.6 Hyundai Accent 94-  Lantra 90-                               Pony 85- VAZ  2108-21099 VAZ  2110-2112, 2170, 1118 UAZ 3163 Patriot UAZ 469 UAZ 469 UAZ 2206 UAZ 2206/3151/3303/3741/3909 DACIA LOGAN 1.4,1.6 DCI
DACIA LOGAN MCV 1.4,1.6DCI LADA Kalina 1117
LADA Kalina 1118
LADA Kalina 1119
LADA PRIORA 2170
LADA PRIORA 2172 LADA Vesta 2180 (15-) 1.6i  (КПП VAZ 21807) LADA X-RAY C (15-) (дв.H4Mk/КПП Renault JR5) LADA GRANTA  LADA GRANTA  Tavria 1102                     VAZ  2121 VAZ  2121 UAZ 2206 UAZ 2206/3151/3303/3741/3909 UAZ 31512 UAZ236571 UAZ 31512 UAZ236571 LADA Vesta 2180 (15-) 1.6i  (15-) (КПП Renault JH3) VAZ   1111 2121 DACIA LOGAN 1.4,1.6
SANDERO /STEPWAY I 1.4,1.6DCI LADA Vesta 2180 (15-) 1.6i LADA Vesta 2180 (15-) 1.6i  (15-) (КПП Renault JH3) LADA X-RAY C  (15-) (дв.H4Mk/КПП Renault JR5) LADA X-Ray (15-)/Largus (15-) (КПП VAZ 21809/21827) LADA LARGUS  LADA Vesta 2180 (15-) 1.6i  (КПП VAZ 21807) Tavria 1102    2121          Moskwitz 2141 LADA LARGUS 16V LADA X-Ray (15-)/Largus (15-) (КПП VAZ 21809/21827)

 

After-sales Service: Three Years
Condition: New
Color: OEM Standard
Certification: CE, ISO, ISO/Ts16949
Type: Universal Joint
Application Brand: Nissan, Iveco, Toyota, Ford, Lada Mitsubishi FIAT Opel Peugeot Renault Citroen
Customization:
Available

|

Customized Request

cv joint

How Long Does a CV Joint Last?

Having a constant velocity joint (CV joint) on your vehicle allows for power to be transmitted through the drive shaft at a constant rotational speed. Constant-velocity joints are used primarily in front-wheel drive vehicles.

Wear and tear

During a car’s lifetime, it’s likely that it will develop wear and tear on the CV joint. This is a component of the drive axle that enables smooth rotation and steering. If it is worn out, your vehicle may not turn as easily and you may experience excessive vibrations.
The first symptom of CV joint wear and tear is a clicking or clunking sound when turning the car. This is the result of the rubber boot that covers the joint being worn out. If this part is damaged, dirt and debris may be able to get inside the boot. If this happens, it can cause the joint to wear out and break.
Using the CV joint may not be enough to repair the problem. It can be a good idea to have your joint looked at by a mechanic. This is a cheaper alternative than replacing the entire joint assembly.
If your vehicle has over 100,000 miles on the odometer, you should have it checked out. If your CV joint is damaged, you may be forced to have it replaced. This will likely cost between $400 and 800.
A worn out CV joint may also cause your steering wheel to feel heavy and bounce. This could lead to a collision or even a serious accident. If you don’t take care of the problem, you could end up stranded.
The first step to repairing a CV joint is to remove the lower ball joint. During this process, you may have to do some reverse acceleration to test the joint.
A worn out CV joint may also leak grease around the tyres. This is a common symptom of CV joint wear and tear. This grease can become contaminated, making it less effective as a lubricant.
If your CV joint has a lock-nut, you may be able to fix it yourself. If you can’t, you may have to call a towing service.
If you think your CV joint has gone wrong, it is important to find a reputable repair shop. It is also important to shop around for estimates. This will help you decide on the best possible price for the repair.

Common causes of CV joint failure

cv joint
Having a bad CV joint can make handling your vehicle more difficult and unsafe. If you suspect that your vehicle may be suffering from CV joint failure, there are several steps you can take to determine the condition of the joint.
Depending on the severity of the condition of your joint, you may need to have the joint replaced. Typical CV joint failure symptoms include a loud clunking sound when accelerating or decelerating, a grinding noise while turning, and a snapping sound.
You should also check for grease leaks, which are a sign of a damaged joint. Grease leaks can accelerate the wear and tear of a joint. Grease is important for lubricating the joint, and leaking it will allow debris to enter the joint.
Another common cause of CV joint failure is rust. Rust normally comes from moisture. Rust can affect the joint’s ability to absorb friction. Rust can also create cracks in the joint’s rubber boots. If you see a crack, you should replace your CV joint immediately.
Another common symptom of a bad CV joint is the sound of a knocking noise. This can come from the inner or outer joint of a rear-wheel drive vehicle. If you notice a knocking noise, try accelerating slowly in a circle to determine if it is caused by a bad joint.
If you hear a knocking noise that seems to get louder and louder with each passing mile, you may have a bad CV joint. If the noise is coming from the front wheels, you should check the wheel lug nuts for looseness.
If you are not a car mechanic, you may need to seek professional help. Typically, professionals will replace the entire axle assembly, including the CV joint, when it is damaged.
CV joint wear can cause problems with vibrations, which can make driving dangerous. This joint is critical to the vehicle’s suspension system. In addition to allowing for wheel control, constant velocity joints help to transfer power from the transmission system to the wheels.
If you suspect that your CV joint may be faulty, make sure you have a mechanic inspect your car before you decide to repair it yourself.

Symptoms of a bad CV joint

Symptoms of a bad CV joint can be extremely dangerous if left unnoticed, so be sure to check on yours regularly. Failing CV joints can cause a range of problems from excessive vibration to loss of control. Before attempting any repairs, make sure you follow your manufacturer’s specifications.
One of the most common symptoms of a bad CV joint is the clunking sound that occurs when turning. This is due to the fact that the joint is unable to balance properly during rotation. The sound is usually noticeable when accelerating or turning in a circle.
The best way to check for a clunking sound is to crank the steering wheel to one side. If it makes a clicking noise, it’s likely that the CV joint is in need of repair.
Another symptom of a bad CV joint is the presence of grease on the tires. This grease can be a sign that the joint is leaking grease and dirt.
Another symptom of a bad joint is a clunking noise when you change gears on the vehicle. This symptom can also be caused by a broken CV joint boot. This can result in debris getting into the joint and causing significant wear.
A CV joint is a vital component in any vehicle. These joints transfer power from the transmission to the wheels. They are also a vital part of vehicle suspension systems. The joint’s ability to perform well is based on a number of factors. If the joint fails, it could cause transmission slippage, and it could also prevent the wheels from rotating properly.
Other symptoms of a bad CV joint include shuddering in the axles, excessive vibration, and loss of alignment. If these symptoms occur, the joint should be repaired immediately. If the problem persists, it may be time to replace the whole shaft assembly.
The most important symptom of a bad CV joint is the click, clack, and shudder that occur when turning. If this happens, make sure the CV joint is not leaking transmission fluid. A low transmission fluid level can also cause overheating and shifting problems.

How long can you drive with a damaged CV joint?

cv joint
Depending on your car’s model, CV joints usually last between 70,000 and 120,000 miles. The lifespan of CV joints depends on how frequently you drive, how harsh the driving conditions are, and how often you perform maintenance.
A damaged CV joint can cause you to experience excessive vibrations and can affect your transmission. When this happens, you will have a hard time maintaining a straight course on the road. Taking your vehicle to a mechanic will help you get the repair you need.
If you notice a clicking noise when turning, you may have a damaged CV joint. This sound can be louder on the left side of the vehicle than the right side. You may also hear a loud tapping sound. The clicking will become more pronounced as the part wears out.
The CV joint is an intricate system that helps connect axles to the front wheels of your vehicle. It works by transferring torque from the transmission to the drive wheels. If the joint is worn out, the axle can slip or break. You may hear grinding or popping noises when you turn or accelerate.
A worn CV joint will also cause clunking noises when shifting or turning. If you hear these sounds, it is best to take your car to a mechanic as soon as possible.
It is important to know how to test your CV joint. This will help you determine whether the joint needs to be replaced or repaired. Having your CV joint repaired will help you avoid expensive repairs and prevent further damage.
To test your CV joint, you can drive in a slow circle in an empty parking lot. When you turn left, you will hear a clicking sound. If you turn right, you will hear a knocking sound.
A worn CV joint can also cause your car to shake or be bouncy. You will also hear grinding noises when you brake at low speeds. If these noises are accompanied by a popping or rapping noise when you hit a bump, it is likely that the joint is worn out.
China supplier CZPT OEM 6001548660 6001548658 6001548103 Auto Parts CV Joint Drive Shaft Producer for Renault Lada Vesta 2180 Dacia Logan Sandero Stepway Volkswagen Passat   driving with bad cv joint 4x4China supplier CZPT OEM 6001548660 6001548658 6001548103 Auto Parts CV Joint Drive Shaft Producer for Renault Lada Vesta 2180 Dacia Logan Sandero Stepway Volkswagen Passat   driving with bad cv joint 4x4
editor by CX 2023-11-21